Protac Ultra GlossUV 104cm x 50m

Drytac Protac Ultra Gloss is a 50µ polyester carrier coated with a 25µ solvent acrylic adhesive. To maximize the homogeneous mirror effect, it is necessary that the Protac Ultra Gloss UV film is applied to a solid, hard and completely smooth surface. The image will significantly gain depth and color contrast. This is a polyester laminating film with a "hybrid cross-linked" adhesive and therefore the top quality for cold roller lamination. It does not cause silvering. Benefits of high-quality laminating films: they are extremely light (unlike cover glass) dust and moisture cannot get between the self-adhesive laminating film and the image (yes, under the glass) increased abrasion resistance and complete water resistance high degree of protection against UV radiation and ozone O3 (against image fading) Lamination tool: roller laminator. Preheating of the film is not necessary. Recommendations: when applying, set high pressure and low feed speed laminate fully stabilized (dry) photos; the recommended minimum delay after inkjet printing is 6 hours during application the film usually stretches slightly (typically 1 mm per meter of length), so give it time to shrink again and do the final trimming of the laminated photo again at least six hours after lamination