ECN-2 Cinema Film Developing - The Only Place in the Baltics!
BFS is the only place in the Baltic States offering professional ECN-2 colour (cinema) film developing with complete remjet backing removal. Our specialists ensure authentic cinematographic quality for Kodak Vision3 and CineStill films: ECN-2 film developing in Riga and by mail from all over Europe.

- €5.90135 film, with remjet removal
- Mondays and Wednesdaysdeveloping days; ready the next business day
- Push/pull ±2 EV+€2.50
- Vision3 · CineStill135 (35mm) format only
ECN-2 Film Development Pricing
| Service | 135 film |
|---|---|
| Standard ECN-2 developing (with remjet removal) | €5.90 |
| Push by up to +2 stops | +€2.50 |
| Pull by up to -2 stops | +€2.50 |
All prices include complete remjet backing removal and use of Bellini ECN-2 chemistry. We develop on Mondays and Wednesdays - ready the next business day.
Prices include VAT.
Packages (development + scanning)
Standard Package
- ECN-2 developing
- Remjet backing removal
- Standard quality scanning
- Contact sheet (10x15cm)
- USB/email
High Quality Package
- ECN-2 developing
- Remjet backing removal
- High quality scanning
- Contact sheet (10x15cm)
- USB/email
Cinematographic Package
- ECN-2 developing
- Remjet backing removal
- Maximum quality scanning
- Contact sheet (10x15cm)
- USB/email
*Push/pull processing costs an additional €2.50
Scanning packages include a 10x15 contact sheet. You can order a larger contact sheet with scanning: A5 - €1.00, A4 - €2.00.
ECN-2 Development Process
How the ECN-2 process with remjet removal works:
Remjet softening
We soften the carbon layer with a special pre-treatment solution.
Mechanical removal
We carefully remove the carbon layer with a soft sponge and special tools.
Chemical wash
We wash away all remaining carbon particles to leave clean negatives.
ECN-2 development
We develop your film in Bellini chemistry (38°C ± 0.1°C) using rotary processing (Jobo).
Stabilization and drying
We stabilise and dry your film in a controlled, dust-free environment.
Your negatives are clean, with authentic cinema colours and a cinematographic look, ready for scanning or printing without carbon residue.
Supported Films
| Film | Remjet | Process at BFS |
|---|---|---|
| Kodak Vision3 50D, 250D, 200T, 500T | yes | ECN-2 with remjet removal |
| CineStill 50D, 800T | none (without remjet backing) | ECN-2 (or C-41) |
| Other ECN-2 films | on request | ECN-2 |
135 (35mm) format only. We do not develop 120 cinema films (not available), 16mm and Super 8 films, 65mm or other professional formats.
About ECN-2 cinema film developing
We develop colour motion picture film in the ECN-2 process for cinema stocks used in regular 35 mm still cameras. If you choose an ECN-2 package, we also scan the frames to give you digital copies.
Cinema negative films usually have a remjet backing that must be removed during processing, so they should not be sent through standard C-41 developing. Before handing in your film, check that it is meant for the ECN-2 process. For regular colour negative, slide or black and white film, choose the matching developing service.
We develop ECN-2 colour cinema film and are the only place in the Baltics offering complete remjet backing removal. We develop Kodak Vision3 and CineStill 35mm films using Bellini ECN-2 chemistry and rotary processing (Jobo). We carefully remove the remjet backing to leave clean negatives without carbon particles and preserve authentic cinematographic colour reproduction. With over 30 years of film processing experience, we guarantee cinematographic quality and professional results.
We develop cinema film by hand on Jobo rotary machines, using Bellini ECN-2 chemistry. This is the process these films were designed for.
Many labs wash off the remjet backing and cross-process cinema film in C-41 chemistry. This can also give a result, but ECN-2 uses a gentler developer matched to the film. Cinema film developed in C-41 chemistry:
- has more contrast (much like a slight push) and loses some dynamic range.
- is grainier.
- has colour shifts that can differ between shadows and highlights, making them very hard to correct in post-processing.
When ECN-2 film is developed in ECN-2 chemistry, you get the image the manufacturer intended: natural colours, smooth transitions and a wide tonal range.
CineStill films are essentially Kodak Vision3 cinema films with the remjet backing already removed at the factory. They can be developed in the C-41 process, but you will get the best result by developing them in ECN-2 chemistry.
Our ECN-2 Services
Supported Films
135 (35mm) format only
- Kodak Vision3 - 50D, 250D, 200T, 500T
- CineStill - 50D, 800T (without remjet backing)
- Other ECN-2 - on request
Remjet Removal
We are the only place in the Baltics offering complete carbon layer removal:
- Special pre-treatment for softening
- Mechanical cleaning with a soft sponge
- Chemical wash for residue removal
- Clean negatives without carbon particles
Bellini ECN-2 Chemistry
We use this chemistry for ECN-2 processing:
- Authentic cinema colours
- Precise temperature control (38°C ±0.1°C)
- Consistent cinematographic results
- Optimised for Vision3 films
Push Processing
You can use push processing to correct exposure in ECN-2 cinema film:
- Up to +2 stops (EV)
- Increased contrast and richness
- Enhanced shadows
- A cinematographic result
Pull Processing
You can use pull processing to correct overexposure:
- Up to -2 stops (EV)
- Reduced contrast
- Softer, muted tones
- Smooth transitions
Professional Quality
- Rotary processing (Jobo)
- Processing tailored to each film
- Cinematographic 'film look'
- Archival quality processing
- Wide colour gamut
Professional ECN-2 Film Scanning
You can also have your cinema film scanned with professional equipment.
Cinema film needs a specific scanning approach to preserve its look and colour palette. We use Noritsu and Nikon scanners with cinema film profiles for authentic Vision3 colours, a wide dynamic range and smooth gradations. We scan only after removing the remjet backing completely.
Why Choose BFS ECN-2 Development?
- The only place in the Baltics with complete ECN-2 process and remjet removal
- 30+ years of experience in film processing
- Professional Bellini ECN-2 chemistry for cinematographic quality
- Careful remjet backing removal in a specialised process
- Rotary processing (Jobo) for optimal quality and control
- Authentic Vision3 colour reproduction and 'film look'
- Specialised cinema film scanning with profiles
- Processing tailored to each film
- Regular developing - 2x per week
Frequently Asked Questions
What is the ECN-2 process and which films is it designed for?
ECN-2 is the standard cinema film developing process designed for motion picture films:
- Kodak Vision3 series films (50D, 250D, 200T, 500T)
- CineStill films (50D, 800T) - modified cinema films without remjet backing
- Other professional cinema films with ECN-2 marking
ECN-2 films produce negative images with a special cinematographic colour palette and a wide dynamic range.
ECN-2 or C-41: why not develop Vision3 in the C-41 process?
Vision3 film can technically be developed in the C-41 process, but the remjet backing has to be removed first. If it is not, the remjet comes off during developing, contaminates the chemistry and can ruin both that film and the other films in the same run.
Even with the remjet removed, the result will not be what the film was designed for. The ECN-2 process uses a gentler developer that Vision3 is matched to, so cinema film developed in C-41 chemistry:
- has more contrast (much like a slight push) and loses some dynamic range.
- is grainier.
- has colour shifts that can differ between shadows and highlights, making them very hard to correct in post-processing.
The ECN-2 process removes the remjet backing completely and produces authentic cinema colours, smooth transitions and a wide tonal range. We recommend ECN-2 for Vision3 cinema film.
CineStill films have no remjet backing, so they can be developed in either the C-41 or the ECN-2 process. They too give the best result in ECN-2 chemistry.
Do you develop Super 8, 16 mm or 35 mm motion picture film?
No. We only develop ECN-2 film made for still cameras, in 35 mm cassettes. We do not develop cine film in cartridges or on reels (Super 8, 16 mm, or 35 mm cinema rolls), because it needs different equipment and the demand for this service in Latvia is too small.
What is the remjet backing and why must it be removed?
Remjet (Removable Jet Black) is a black carbon layer on the back of cinema films:
- Protects film from light reflection in camera mechanisms
- Prevents halo effects in cinema projection
- Must be removed before developing
- Damages the chemistry and disrupts processing if left in place
BFS is the only place in the Baltics offering complete remjet removal using a specialised process.
What is the difference between Vision3 and regular colour films?
Vision3 cinema films have these characteristics:
- Wider colour gamut and dynamic range
- A distinctive colour palette (cinematographic look)
- A greater need for precise exposure
- Optimised for cinema projection and digital processing
- Carbon remjet backing
The result is an authentic 'film look' with rich colours and smooth tonal transitions.
Can you develop CineStill films in the ECN-2 process?
Yes. CineStill films are modified Vision3 films:
- CineStill 50D - from Vision3 50D (without remjet backing)
- CineStill 800T - from Vision3 500T + special processing
- No remjet removal required
- Can be developed in both C-41 and ECN-2 processes
- The ECN-2 process produces more authentic cinema colours
We recommend the ECN-2 process for better cinematographic results.
How often do you develop ECN-2 films?
We develop ECN-2 films twice per week, usually on Mondays and Wednesdays, because:
- The chemistry costs for ECN-2 are higher
- The remjet removal process is complex
- We need enough film for a batch
We develop ECN-2 film on Mondays and Wednesdays (hand in by 11:00 on the processing day). Your order is ready the next business day. Contact us to discuss larger projects or urgent orders.
What ECN-2 film formats can you develop?
We develop only 135 (35mm) ECN-2 films:
- Kodak Vision3, all 35mm versions
- CineStill 50D and 800T
- Other 35mm ECN-2 films on request
We do not develop: 120 cinema films (not available), 16mm and Super 8 films (no appropriate equipment), 65mm or other professional formats.
All 35mm ECN-2 developing services include complete remjet removal.
What is push and pull processing?
If the light is too low or too bright for the film you have with you, you can expose it at a different speed: higher (push) or lower (pull). The developing time is then extended or shortened accordingly to compensate for the exposure difference. This also helps if you forgot to change the ISO setting on the camera.
Push: the film is developed for longer to compensate for underexposure. For example, an ISO 400 film exposed as ISO 800 or 1600 lets you shoot in lower light. The result will have more contrast and grain, with deeper shadows.
Pull: the film is developed for a shorter time to compensate for overexposure. For example, an ISO 400 film exposed as ISO 100 is useful in bright light. The image will be softer, with less contrast and finer grain.
Available for all film types with limitations:
- C-41 and black and white films: up to 3 EV. Negatives have a wide exposure latitude, so larger corrections still give usable results.
- E-6 (slides): up to ±2 EV recommended. Slides are very sensitive to changes in exposure. ±3 EV is also possible on request, but the blacks turn greyish, colours shift and shadow detail is lost.
- ECN-2 (cinema films): up to 2 EV. Larger corrections noticeably increase fog and grain and also cause colour balance problems.
Push or pull over a wider range is also possible by agreement, but without a quality guarantee.
Surcharge: €2.50
Is push/pull processing available for ECN-2 films?
Yes, for ECN-2 film within these limits:
- Push: up to +2 EV (increases contrast and richness)
- Pull: up to -2 EV (reduces contrast and softens tones)
- The colour shift is minimal compared to E-6
- Maintains a cinematographic look
Vision3 films tolerate exposure errors well. Push/pull processing can also be useful for creative projects.
Why is ECN-2 developing more expensive than C-41?
ECN-2 costs more than C-41 because of the processing costs and work involved:
- ECN-2 chemistry is 4-5 times more expensive
- The remjet removal process requires additional time and materials
- A specialised process with precise temperature control (38°C)
- Unique service in the Baltics
The result is an authentic 'film look' with cinematographic quality that other processes cannot reproduce.
Is scanning included in the ECN-2 developing price?
No, the base price €5.90 is only for developing with remjet removal. We offer packages:
- Standard package: €9.90 - developing + remjet removal + scanning + contact sheet
- High quality package: €10.90 - high quality scanning
- Cinematographic package: €24.90 - maximum quality scanning
All packages include complete remjet removal. For details of cinema film scanning, see our scanning section.
How will I receive the developed ECN-2 films?
Developed ECN-2 films are:
- Carefully cleaned of all carbon particles
- Dried in a special dust-free environment
- Can be placed in archival quality sleeves
The films can be collected at our store or delivered (courier or parcel locker from €3.00 in Latvia). Store films in a cool, dry place to help preserve them. Once the remjet backing is removed, your film is ready for immediate scanning without carbon residue.
Orders from across Europe. Order online and send your film by mail to P. Brieža iela 3, Rīga, LV-1010, Latvia. You do not need to call first. How to send film by mail
Order online and send your film by mail: C-41 colour film, black and white film, E-6 slide film, ECN-2 cinema film.
- Write on the package: your name and address, the film type, the processing you need and your contact details.
- Payment: new customers pay in advance.
- Return: you pay for return delivery and bear the delivery risks. Delivery is not included in the service price. Courier or parcel locker delivery starts from €3.00 in Latvia.
Other services
In addition to ECN-2 colour (cinema) film developing, BFS offers a complete range of film processing services:
C-41 Colour Negatives
Professional colour negative film developing. Both machine (Noritsu) and hand (Jobo) developing is available. Push/pull up to 3 EV.
ViewE-6 Colour Slides
Professional slide film developing with precise temperature control. The only place in the Baltics! We also offer push/pull processing.
ViewBlack & White Films
Classic black and white film developing with Kodak XTOL developer. We also offer fog reduction for old films.
ViewFilm scanning
Negative and slide scanning on Noritsu HS-1800 and Imacon Flextight scanners: 135, 120 and sheet film, three quality levels.
ViewContact Us
- Address
- Pulkveža Brieža iela 3, Riga
- Phone
- +371 67324793
- Business hours
- Weekdays 10:00-19:00
Professional ECN-2 colour (cinema) film developing - the only place in the Baltics since 1995