Falcam F22&F38&F50 Quick Release Camera Cage Black (FOR A7M5/A7R5/A7M4)

Falcam F22&F38&F50 Quick Release Camera Cage Black (FOR A7M5/A7R5/A7M4)

The Falcam F22&F38&F50 Quick Release Camera Cage Black (FOR A7M5/A7R5/A7M4) is an aluminium camera cage custom fit for the Sony A7M5, A7R5 and A7M4, with the F22, F38 and F50 quick release system.

Highlights

• Custom fit for Sony A7M5 / A7R5 / A7M4
• Leaves buttons, battery door and screen free
• F22, F38 and F50 quick release mounts
• Removable side plate for a slimmer grip
• Two point fixation against movement
• Built in magnetic wrench

Custom fit

The cage is matched to the Sony A7M5, A7R5 and A7M4 and does not block the buttons, battery door or flip out screen. The curved grip follows the natural curvature of the finger for comfortable handling. This keeps the camera fully usable in the cage.

Firm fixation

The embracing bottom plate surrounds the camera firmly with a two point fixation: a 1/4" screw with lock washer and a positioning column. This stops the camera from shaking in the cage. When mounting the side plate, fix the positioning column first and then the two side screws.

F22/F38/F50 ecosystem

The cage is compatible with the F22, F38 and F50 ecosystem, so you can flexibly expand accessories for stabilisers, tripods and sliders. Switching between horizontal and vertical shooting is fast. A top handle and side handle are recommended combinations.

Thoughtful details

The removable side plate provides a slimmer grip or stays on to connect external equipment. Shoulder strap holes let the camera hang lens down to avoid impact. A built in magnetic wrench makes assembly easy and the screw stays attached when removing the camera.

• Brand: Falcam
• Model: C00C3605B
• Type: camera cage for Sony A7M5 / A7R5 / A7M4
• Colour: Monet Black
• Material: 6061 aluminium alloy
• Dimensions: approx. 145.3 × 67.2 × 115.5 mm
• Net weight: approx. 213.1 g
• Mounts: F22, F38 and F50 quick release, 1/4" thread, ARRI holes, cold shoe

• 1 x Camera cage
• 1 x Side plate
• 1 x 1/4" screw (S01SP068)
• 2 x Nylon lock washer
• 2 x Stainless steel lock washer
• 2 x 1/4" screw (C12MP005)
• 1 x T8 L wrench
• 1 x M2.5×6 screw
• 1 x H4 hex wrench with ring
• 1 x Wrench piece